PCD router bits

Polycrystalline diamond (PCD) is a layer of approximately 0.6 mm black diamond granules compressed at a very high pressure and temperature onto a hard-metal carrier.

  • Much longer tool life then hard-metal tools while processing abrasive materials.
  • Suitable for machining various materials including hardwood, glued-laminated wood, plastics, reinforced plastics, Trespa and Corian.

Note: PCD is fragile, always keep in packaging when not in use.

Polycrystalline diamond (PCD) is a layer of approximately 0.6 mm black diamond granules compressed at a very high pressure and temperature onto a hard-metal carrier. Much longer tool life then... read more »
Close window
PCD router bits

Polycrystalline diamond (PCD) is a layer of approximately 0.6 mm black diamond granules compressed at a very high pressure and temperature onto a hard-metal carrier.

  • Much longer tool life then hard-metal tools while processing abrasive materials.
  • Suitable for machining various materials including hardwood, glued-laminated wood, plastics, reinforced plastics, Trespa and Corian.

Note: PCD is fragile, always keep in packaging when not in use.

1 From 4
No results were found for the filter!
DIA-Fräser DP Z=1+1 D=12 L=25 GL=69 S=12
DIA-Fräser DP Z=1+1 D=12 L=25 GL=69 S=12
DIA-Fräser DP Z=1+1 D=12 L=25 GL=69 S=12
€141.88 *
DIA-Fräser DP Z=1 D=12 L=25 GL=69 S=12
DIA-Fräser DP Z=1 D=12 L=25 GL=69 S=12
DIA-Fräser DP Z=1 D=12 L=25 GL=69 S=12
€149.40 *
DIA-Fräser DP Z=1+1 D=16 L=25 GL=85 S=16
DIA-Fräser DP Z=1+1 D=16 L=25 GL=85 S=16
DIA-Fräser DP Z=1+1 D=16 L=25 GL=85 S=16
€171.95 *
DIA-Fräser DP Z=1+1 D=16 L=25 GL=85 S=16 links
DIA-Fräser DP Z=1+1 D=16 L=25 GL=85 S=16 links
DIA-Fräser DP Z=1+1 D=16 L=25 GL=85 S=16 links
€171.95 *
DIA-Fräser DP Z=1 D=16 L=25 GL=85 S=16
DIA-Fräser DP Z=1 D=16 L=25 GL=85 S=16
DIA-Fräser DP Z=1 D=16 L=25 GL=85 S=16
€158.80 *
DIA-Fräser DP Z=1+1 D=16 L=35 GL=95 S=16
DIA-Fräser DP Z=1+1 D=16 L=35 GL=95 S=16
DIA-Fräser DP Z=1+1 D=16 L=35 GL=95 S=16
€206.71 *
DIA-Fräser DP Z=1+1 D=16 L=35 GL=95 S=16 links
DIA-Fräser DP Z=1+1 D=16 L=35 GL=95 S=16 links
DIA-Fräser DP Z=1+1 D=16 L=35 GL=95 S=16 links
€206.71 *
DIA-Fräser DP Z=1 D=16 L=35 GL=95 S=16
DIA-Fräser DP Z=1 D=16 L=35 GL=95 S=16
DIA-Fräser DP Z=1 D=16 L=35 GL=95 S=16
€190.74 *
DIA-Fräser DP Z=1+1 D=18 L=25 GL=85 S=16
DIA-Fräser DP Z=1+1 D=18 L=25 GL=85 S=16
DIA-Fräser DP Z=1+1 D=18 L=25 GL=85 S=16
€175.71 *
DIA-Fräser DP Z=1+1 D=18 L=35 GL=95 S=16
DIA-Fräser DP Z=1+1 D=18 L=35 GL=95 S=16
DIA-Fräser DP Z=1+1 D=18 L=35 GL=95 S=16
€211.41 *
DIA-Fräser DP Z=1+1 D=18 L=35 GL=95 S=16 links
DIA-Fräser DP Z=1+1 D=18 L=35 GL=95 S=16 links
DIA-Fräser DP Z=1+1 D=18 L=35 GL=95 S=16 links
€211.41 *
DIA-Fräser DP Z=1+1 D=18 L=35 GL=105 S=25
DIA-Fräser DP Z=1+1 D=18 L=35 GL=105 S=25
DIA-Fräser DP Z=1+1 D=18 L=35 GL=105 S=25
€230.20 *
1 From 4
Viewed